Cinagro Plants Drip Irrigation Kit | Watering Kit for Home Garden, Farming & Agriculture Purposes (10 Plants Kit)

Good quality product. Easy to assemble on your own. This doesn’t include the sprinkler type of emitter though.

The large number of mixed reviews had me hesitant in ordering this. When I finally did:
1. The product arrived one day before due date.
2. It was impeccably packed.
3. Each count was correct – including the manual. This is a little difficult to locate as it’s only a small card, printed on reverse of the packing slip. I also received the 20 extra red sprinklers as promised.
4. Installation was fairly easy – though it was done largely by a friend who is good with plumbing and repairs.
5. The item quality turned out to be very, very good. ⭐️⭐️⭐️⭐️⭐️
6. There were leakages at a couple of points where we had inserted the winged connectors in main line. These were fixed easily with a bit of twisting and some m-seal.

But all things are not perfect. The red sprinklers can be regulated to some extent – but not like the shower in your bathroom. They keep dribbling or overshooting. However, we found a good use for these and snuck them between two half round pots, thus serving both pots with one pipe. See pic

The black drippers can be unscrewed for cleaning – but you can’t stop them from dripping. So don’t try.

Tips:
1. Don’t start off cutting this into pieces straightaway. Fit and test one line before taking up the rest.
2. Draw a rough plan of how the layout will be, where do you need T connectors and elbow bends and where all you need to regulate or stop the flow of water.
3. If possible don’t use the tap connector supplied by Cingaro to connect the system to main tap. Use a soft hose pipe and a clamp for this. See pic.
4. Fixing the winged t connectors into the 4 mm pipe is a nightmare with bare hands. Your thumb and fingers will get sore in half an hour. Soften the end of the 4 mm pipe by heating it slightly, and use a gardening glove to twist the t in. Remember that the slanted end goes into the 16 mm pipe, straight end into the 4 mm pipe.
5. You will need to figure out the time you need to leave this on by trial and error. A 9” plastic pot needs about 100-300 ml water. The drippers are rated for 1 litre per hour. So if you leave the system on for about 5-15 minutes, your plants will get enough water.
6. If you have small and large pots, you can order other types of drippers separately and use them on the same line. Green ones are rated at 2 litres per hour.
7. If you want to fit it and forget it, you will have to order a timer valve. You can get a multi outlet timer valve also, if you want separate times and setting for leafy and flowering plants.
Because the system is so flexible, it will very nearly do everything you ask it to do. Except plucking the flowers! 😁

The drip irrigation kit provided is very much useful… But there was only 25 pin connectors.. 5 were missing.. So I can use it only for watering 25 plants. Given 30 dummies instead of 10 shown in the product page… ( -1 star for the carelessness during the packing ). Started watering within half an hour of the delivery..ie connecting the components is so easy… There is a little water leakage but I hope it will stop within 5 to 6 days as mentioned in the product video…

My name Dhananjay Singh, I ordered this drip irrigation system for our Dhyan Ashram’s small phoolwadi, The quality of the product is very good, the fitting, adjustability is good. I installed it myself, so easy because they provide all tiny instruments required for successful installation. Now I feel so satisfied, plants getting irrigated 24X7 and the water consumption is also so less. Sometimes we go out for weeks then we have no worry ab
out watering the plant. Thanks to this product and the manufacturer for such quality product and value for money on Amazon.